Definition: CAT6 is an Ethernet cable standard defined by the Electronic Industries Association and Telecommunications Industry Association (commonly known as EIA/TIA). CAT6 is the 6th generation of twisted pair Ethernet cabling.
CAT6 cable contains four pairs of copper wire and unlike CAT5, utilizes all four pairs. CAT6 supports Gigabit (1000 Mbps) Ethernet and supports communications at more than twice the speed of CAT5e, the other popular standard for Gigabit Ethernet cabling.
As with all other types of twisted pair EIA/TIA cabling, CAT6 cable runs are limited to a maximum recommended run rate of 100m (328 feet).
Twisted pair cable like CAT6 comes in two main varieties, solid and stranded. Solid CAT6 cable supports longer runs and works best in fixed wiring configurations like office buildings. Stranded CAT6 cable, on the other hand, is more pliable and better suited for shorter-distance, movable cabling such as "patch" cables.
CAT6 comes at a significantly higher price tag than CAT5 or CAT5e, and today's applications simply can't take advantage of CAT6's better performance. However, if wiring a home or building for the long term, one may still consider using CAT6.
CAT6 cable contains four pairs of copper wire and unlike CAT5, utilizes all four pairs. CAT6 supports Gigabit (1000 Mbps) Ethernet and supports communications at more than twice the speed of CAT5e, the other popular standard for Gigabit Ethernet cabling.
As with all other types of twisted pair EIA/TIA cabling, CAT6 cable runs are limited to a maximum recommended run rate of 100m (328 feet).
Twisted pair cable like CAT6 comes in two main varieties, solid and stranded. Solid CAT6 cable supports longer runs and works best in fixed wiring configurations like office buildings. Stranded CAT6 cable, on the other hand, is more pliable and better suited for shorter-distance, movable cabling such as "patch" cables.
CAT6 comes at a significantly higher price tag than CAT5 or CAT5e, and today's applications simply can't take advantage of CAT6's better performance. However, if wiring a home or building for the long term, one may still consider using CAT6.
Category 5
The original specification for category 5 cable was defined in ANSI/TIA/EIA-568-A, with clarification in TSB-95. These documents specified performance characteristics and test requirements for frequencies of up to 100 MHz.
Category 5 cable includes four twisted pairs in a single cable jacket. This use of balanced lines helps preserve a high signal-to-noise ratio despite interference from both external sources and other pairs (this latter form of interference is called crosstalk). It is most commonly used for 100 Mbit/s networks, such as 100BASE-TX Ethernet, although IEEE 802.3ab defines standards for 1000BASE-T - Gigabit Ethernet over category 5 cable. Cat 5 cable typically has three twists per inch of each twisted pair of 24 gauge copper wires within the cable. May be unsuitable for 1000BASE-T gigabit ethernet.
Category 5e
Cat 5e cable is an enhanced version of Cat 5 that adds specifications for far end crosstalk. It was formally defined in 2001 in the TIA/EIA-568-B standard, which no longer recognizes the original Cat 5 specification. Although 1000BASE-T was designed for use with Cat 5 cable, the tighter specifications associated with Cat 5e cable and connectors make it an excellent choice for use with 1000BASE-T. Despite the stricter performance specifications, Cat 5e cable does not enable longer cable distances for Ethernet networks: cables are still limited to a maximum of 100 m (328 ft) in length (normal practice is to limit fixed ("horizontal") cables to 90 m to allow for up to 5 m of patch cable at each end). Cat 5e cable performance characteristics and test methods are defined in TIA/EIA-568-B.2-2001.